View previous topic :: View next topic |
Author |
Message |
silversage New Bee
Joined: 01 Apr 2013 Posts: 4 Location: montana, usa
|
Posted: Tue Mar 07, 2017 6:38 pm Post subject: Questions about grid spacing |
|
|
As an experiment, I'm working on building a hexagonal, perone style hive and was having some thoughts/questions about the comb grid. The PDF I have about making a perone hive cites the grid spacing based on helping keep the brood and cluster warm. Where I live we get a couple months in the 90s F and have weeks of below 0 F in the winter and a fair bit of wind, low humidity. Would I possibly want a slightly different grid? I was wondering about a solid lid for the brood area with holes in it for bee access to the supers, but that might be going overboard a bit. The brood area is made from 1 inch thick oak if that makes any difference. |
|
Back to top |
|
 |
catchercradle Golden Bee

Joined: 31 May 2010 Posts: 1551 Location: Cambridge, UK
|
Posted: Thu Mar 09, 2017 8:15 am Post subject: |
|
|
The bees will arrange the comb below the grid so that the ventilation suits them IMHO.
When I think of the number of different places I have seen them set up shop and manage it reminds me of how much of hive design is based around the beekeeper's convenience. |
|
Back to top |
|
 |
Wintering New Bee
Joined: 09 May 2016 Posts: 9 Location: Sonoma County, CA
|
Posted: Tue Jan 16, 2018 1:36 am Post subject: Re: Questions about grid spacing |
|
|
silversage wrote: | As an experiment, I'm working on building a hexagonal, perone style hive and was having some thoughts/questions about the comb grid. The PDF I have about making a perone hive cites the grid spacing based on helping keep the brood and cluster warm. Where I live we get a couple months in the 90s F and have weeks of below 0 F in the winter and a fair bit of wind, low humidity. Would I possibly want a slightly different grid? I was wondering about a solid lid for the brood area with holes in it for bee access to the supers, but that might be going overboard a bit. The brood area is made from 1 inch thick oak if that makes any difference. |
That temperature swing seems doable for a Perone so long as it's well established when it hits freezing. I'd do regular spacing on the grid and if you're concerned about the cold go with a Warre-type quilt on the outside. As far as the heat goes the bees should keep it ventilated. |
|
Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Quality Top Bar Hives by Andrew Vidler
|
Conserving wild bees
Research suggests that bumble bee boxes have a very low success rate in actually attracting bees into them. We find that if you create an environment where first of all you can attract mice inside, such as a pile of stones, a drystone wall, paving slabs with intentionally made cavities underneath, this will increase the success rate.
Most bumble bee species need a dry space about the size a football, with a narrow entrance tunnel approximately 2cm in diameter and 20 cm long. Most species nest underground along the base of a linear feature such as a hedge or wall. Sites need to be sheltered and out of direct sunlight.
There is a spectacular display of wild bee hotels here
More about bumblebees and solitary bees here
Information about the Tree Bumblebee (Bombus hypnorum)
|
|
Barefoot Beekeeper Podcast
|
|
|
|
4th Edition paperback now available from Lulu.com
|
site map
php. BB © 2001, 2005 php. BB Group
View topic - Questions about grid spacing - Natural Beekeeping Network Forum
|
|